| ANATECH
Phono Preamplifier, PHPA-2-MM and PHPA-2-MC. |
|
| Safety according to IEC / EN 60065. | |
 |
Front Panel. |
 |
Rear Panel. |
| - Unique and
optimized solution of the RIAA-filter - Extremely small phase and amplitude deviation from the RIAA-curve - Extremely low input noise and hum - Excellent good linearity - Output transformer - External 12VDC power supply or battery (no influence from the main) - No feedback from output to input |
|
| Specifications | ||
 |
|
|
| Distortion : | < 0,1 % at 300 mV RMS, 1 kHz output. | |
| Gain : | MM |
40 dB at 1 kHz. |
MC |
60 dB at 1 kHz. | |
| Switches : | Power, Mute and Operate. | |
| Input Impedance : | MM |
47 kohm // 82 pF ( Standard ).* |
MC |
100 ohm ( Standard ).* | |
| * Other impedance on request. | ||
| Output Impedance : | 10 kohm. | |
| Maximum Inputs : | MM |
300 mV RMS at 1 kHz, 100 kohm load. |
MC |
30 mV RMS at 1 kHz, 100 kohm load. | |
| Rated Outputs : | 300 mV RMS, 20 Hz to 20 kHz, 100 kohm load. | |
| Tube Complement : | 2 x 6SL7GT alternative 4 x 6CW4. | |
| Power Requirements : | 12 VDC / 0,4A. Fuse : 2 x T2,5AH, 250 VAC. |
|
| Dimensions : | Width 483 mm ( 19" ). | |
| Height 88 mm ( 2HE ). | ||
| Depth 345 mm. | ||
| Weight : | 6 kg. | |