ANATECH Power Amplifier, PA-1.

Safety according to IEC / EN 60065.

View from the interior of the power amplifier

- Push-Pull Class A - Cathode-Bias - Excellent dynamics and bass response - Extremely low input noise and hum - Excellent good linearity

Specifications
Power Output	:	2 x 15 Watts into 4 or 8 ohm load impedance.
Distortion ( 1 kHz )	:	< 1 % at 15 Watts, below 0,05 % at 1 Watt.
Power Bandwidth	:	10 Hz to 50 kHz ( -3dB points at 15 W ).
Frequency Response	:	3 Hz to 180 kHz ( -3 dB points at 1 W ).
Gain	:	32 dB.
Input Sensitivity	:	0,20 V RMS ( 4 ohm load impedance, 15 W ). 0,27 V RMS ( 8 ohm load impedance, 15 W ).
Input Impedance	:	1 Mohm.
Tube Complement	:	2 - Matched pair 6L6GC - Power Output, 2 - E81CC - Driver, 2 - EF86 - Input.
		On request the amplifier can be delivered with 5881, 7027A, KT66 or KT 88 as power output tubes.
Switch	:	Power On-Off.
Power Requirements	:	230 VAC 50 / 60 Hz, 150 Watt maximum. Line Fuse : T 1,6 A , 250 VAC.
Dimensions	:	Width 483 mm ( 19" ) Height 176 mm ( 4HE ) Depth 345 mm
Weight	:	15 kg.